激安大特価! Bars Crash アルトライダー AltRider R1200 Cooled Water GS R1200 Cooled Water Rallye GS R1200 Cooled Water Exclusive GS-ブレーキホース・ケーブル












■商品番号
R114-6-1002


■注意■この商品は下記となります。必ずご確認ください。
カラー:Triple Black (Grey) / タイプ:With Mounting Bracket

カラー:Silver / タイプ:Without Mounting Bracket
カラー:Black / タイプ:Without Mounting Bracket
カラー:Triple Black (Grey) / タイプ:Without Mounting Bracket
カラー:Silver / タイプ:With Mounting Bracket
カラー:Black / タイプ:With Mounting Bracket

※リンク先に商品がない場合、すでに完売している商品となります。予めご了承ください。

■注意点
※Note: BMW changed the design for the frame in November 2013. To tell if you need bars for the 2013 or 2014 and newer models, examine the frame tab referenced in steps 5 and 9 in the installation instructions. If your tab has two holes, you’ll need 2013 bars. If your tab has one hole, you’ll need 2014 and newer bars.
※メーカー都合により商品の仕様変更がある場合がございます。ご了承ください。


■適合車種
R1200 GS Exclusive Water Cooled 14- 水冷
R1200 GS Rallye Water Cooled 14- 水冷
R1200 GS Water Cooled 14- 水冷

■詳細説明
Order the Crash Bars and Skid Plate for the water cooled R 1200 GS together as one system here.

If you’ve already installed the AltRider Skid Plate, mounting brackets are not required. Choose ”Without Brackets” in the dropdown to the right.

For the first time in its 30 plus year history the venerable boxer engine in the R1200 GS will now be water cooled. And that’s not the only ace up BMW’s sleeve for 2013.

A new bike requires new protection, so AltRider completely redesigned the crash bars for the new water boxer model. A step up from years past, they utilize 1.25” (31.75 mm) O.D. stainless steel tubing making them the largest diameter bars on the market. The decision to increase the diameter came from years of research and production results. The West Coast BMW Off-Road Training School has been outfitting their bikes with AltRider gear for the past 3 years. This real world testing yielded much insight on how much damage large bikes can do during crashes. 1” bars (25.4 mm) allow a significant amount of flex during a crash, creating the need to space them farther from the bike. The stout 1.25” bars allow a tighter profile while still providing real protection. Available in shot peen satin, black powder coat or triple black (grey) powder coat finish, they’re extremely resistant to rust whether you’re riding the liquid cooled GS across the highway or across a river.

The top of the bars are secured in a total of three locations per side. The front mount is the only one on the market designed to utilize 2 bolts per side to increase the ability to distribute the load of any impact. The rear is held with a custom machined through-bolt that replaces the engine mount hardware -- increasing strength of the bars up to 25%. AltRider offers one of only a few designs that utilize a custom machined through-bolt. There are no plastic spacers to break upon impact. This creates an incredibly strong design that distributes any impact evenly throughout the bars, and also makes a solid foundation for upper crash bars.

Another first for AltRider crash bars are the integrated 3/16” (4.76 mm) lower flanges designed to interface with an AltRider skid plate. This creates a modular protection system that doesn’t mount directly to the motor and is substantially more robust than anything else on the market.

Other bars are fabricated by crimping then welding joints, creating a forced fit with a weak bond. In this method, gaps are created which are later filled with weld. The additional heat causes warpage and all-too-common installation difficulties. All AltRider joints are 5-axis laser cut, creating a perfect union before the bars are hand TIG welded in a jig. This process creates a precision fit, easy installation and superior strength. Using only the best manufacturing techniques means all AtlRider motorcycle accessories are of the highest quality, ensuring the best protection for your adventure bike.

Installation is simple and straightforward. All necessary hardware, including a difficult to find T55 bit, is provided with the bars.

・100% designed and manufactured in the USA
・1.25” (31.75 mm) stainless steel tubing
・5-axis laser cut and hand TIG welded joints
・Custom machined M12 engine through-bolt heat treated and plated to Grade 8
・40 mm flange mount design increases strength exponentially
・3/16” (4.76 mm) lower flanges integrate with AltRider skid plate
・Weight: 12.2 lbs (5.5 kg)

・Compatible with R 1200 GS Rallye and Exclusive models
・”Triple Black (Grey)” color matches the Agate Grey frame tube color of the Exlusive

【メーカー在庫あり】 エスコ ESCO AC100V/8W 作業灯/LED 固定ホルダー2個付 000012240647 JP店
【送料無料・メーカー直送】 有田焼 福泉窯 有田浪漫 ハイレッグワイングラス 小 染錦葡萄 ブルー
【送料無料・メーカー直送】 川島織物セルコン MINTON(ミントン) リーガルハドンホールII キッチンマット 50×250cm FT1590

センターテーブル 【幅900mm】 組立品【代引不可】 送料込!お知らせ